MIL-PRF-44408 - Shelter, Electrical Equipment, Lightweight
This document covers three types of lightweight electrical equipment shelters designed for transport on both the M1037 and M1097 High Mobility Multipurpose Wheeled Vehicle (HMMWV). These shelters are transported by rail, air, marine and highway when mounted or dismounted from their vehicles.
MIL-S-0055541 - Shelter, Electrical Equipment S-250( )/G
MIL-S-28633 - Shelter, Equipment, Multipurpose (S/S By Mil-C-28689)
This specification covers one type of portable, multipurpose equipment shelter nominal 8 feet by 6 feet 8 inches.
MIL-S-29409 - Shelter Assembly, Knockdown
This specification establishes the requirements for the manufacture and acceptance of the Knockdown Shelter Assembly.
MIL-S-29410 - Shelter Assembly, Rigid, General Purpose
This specification establishes the requirements for the manufacture and acceptance of the Rigid Shelter Assembly.
MIL-S-29411 - Shelter Assemblies, 10 Foot And 20 Foot, Electromagnetic Interference
This specification establishes the requirements for the manufacture and acceptance of the 10-and 20-foot (ft) Electromagnetic Interference (EMI) Shelter Assemblies.
MIL-S-29412 - Shelter, Complexing Kit For
This specification establishes the requirements for the manufacture and acceptance of the Complexing Kit.
MIL-S-29413 - Shelter, Joining Corridor For
This specification establishes the requirements for the manufacture and acceptance of the Joining Corridor used with the Marine Corps Expeditionary Shelter System.
MIL-S-29434 - Shelter Assembly, 10 Foot Rigid, General Purpose
MIL-S-29435 - Shelter, Electronics Maintenance Complex (Emc); 10 Foot, Electromagnetic Interference, 20 Foot, Electromagnetic Interference, 10 Foot, Rigid 20 Foot, Rigid
This specification establishes the requirements for manufacture, acceptance and configuration for four types of EMC shelters.
MIL-S-44195 - Shelter, Tacticle, Expandable, Two-Side
This document covers a rigid wall, two-side expandable shelter constructed of aluminum faced,nonmetallic honeycomb sandwich panels, and meeting the International Organization for Standardization (ISO) Cargo Container specification in the transport mode.
MIL-S-44196 - Shelter, Tactical, Non-Expandable
This document covers a rigid wall, non-expandable shelter constructed of aluminum faced, nonmetallic honeycomb sandwich panels, and meeting the International Organization for Standardization (ISO) Cargo Container specification.
MIL-S-44197 - Shelter, Tactical, Expandable, One-Side
This document covers a rigid wall, one-side expandable shelter constructed of aluminum faced, nonmetallic honeycomb sandwich panels, and meeting the International Organization for Standardization (ISO) Cargo Container specification in the transport mode.
MIL-S-46854 - Shelter, Electrical Equipment, General Specification For
MIL-S-49248 - Shelter, Electronic Equipment S-639/G And S-640/G
This specification covers the following:Shelter, Electronic Equipment.
MIL-S-55286 - Shelter, Electrical Equipment, S-280( )/G
MIL-S-55286 - Shelter, Electrical Equipment S-280()/G
This specification covers one type of lightweight field and mobile shelter designed for transport by cargo truck, fixed or rotary winged aircraft, by rail, ship, and landing craft, designated as Shelter, Electrical Equipment S-280( )/G (See 6.6).
MIL-S-55541 - Shelter, Electrical Equipment S-250 ( )/G
This specification covers one type of lightweight field and mobile shelter designed for transport by cargo truck, fixed or rotary winged aircraft, rail and ship, and designated Shelter, Electrical Equipment, S-250( )/G (See 6.2).
MIL-STD-907 - Engineering And Design Criteria For Shelters, Expandable And Non-Expandable (S/S By Astm-E1925)
This standard establishes engineering and design criteria required for the development of shelters.
MIL-STD-911 - The Department Of Defense Standard Family Of Tactical Rigid Wall Shelters
The purpose of this military standard is to provide assistance in the selection of a tactical rigid wall shelter from the DOD Family of Tactical Rigid Wall Shelters and to encourage standardization among the DOD community.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business